TIMKEN Standard Replacement Axle Intermediate Shaft Seal — direct fit for Ford Ranger 4.0L V6 (1995-2009). Genuine quality replacement built to OEM tolerances, ships to all 50 USA states from RevXSC.
Engineered by TIMKEN as a standard replacement grade axle intermediate shaft seal for the 4.0L V6 engine, this 710428 matches factory mounting points and form factor so install requires no modification. Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) Standard replacement spec — the same dimensions, materials and performance envelope as the original factory part.
Search by any number below — they all match TIMKEN 710428:
| Year | Make / Model | Engine | Notes |
|---|---|---|---|
| 1995 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 1996 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 1997 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 1998 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 1999 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 2000 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 2001 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 2002 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 2003 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 2004 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 2005 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 2006 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 2007 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 2008 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
| 2009 | Ford Ranger | 4.0L V6 | Front; 4WD or AWD; Right Hand; (Dana/Spicer 35 Axle) |
Always replace axle intermediate shaft seal components in matched sets where applicable, torque fasteners to factory spec, and inspect adjacent drivetrain components for wear during installation. If you're not sure which variant matches your VIN, send us the last 8 digits of the VIN before checkout and we will confirm fitment.
Is 710428 a direct replacement?
Yes — TIMKEN 710428 is built to OEM form/fit/function for the Ford Ranger 4.0L V6 (1995-2009).
Do you ship to my state?
We ship to all 50 USA states. Tracking is provided.
What's the difference between Economy, Standard Replacement and Heavy Duty?
Economy is the value-priced option for everyday driving; Standard Replacement matches OEM spec; Heavy Duty uses upgraded materials for towing, fleet and severe service.
How can I confirm fitment?
Match year, make, model and engine (1995-2009 Ford Ranger 4.0L V6). When in doubt, send your VIN — we verify before dispatch.
Keywords: TIMKEN 710428, 710428 axle intermediate shaft seal, ford ranger axle intermediate shaft seal, ford ranger 4.0l v6 axle intermediate shaft seal, ford ranger axle intermediate shaft seal 1995-2009, standard replacement axle intermediate shaft seal ford ranger, oem replacement axle intermediate shaft seal ford ranger, aftermarket ford ranger axle intermediate shaft seal, buy 710428 online usa, ford ranger axle intermediate shaft seal usa, ford ranger 4.0l v6 parts, timken axle intermediate shaft seal 1995-2009, BCA NS710428, National Seals 710428, NTN NS710428, SKF 17521
Note: The product image is for illustrative purposes only. Actual product may vary slightly in appearance, packaging, or labeling. Fitment and specifications are guaranteed to OEM standards.